SIMEX

Simex ART is a patented technology specifically designed for the regeneration of bituminous conglomerate which reuses 100% of the material present on site without removing the milled material or adding other materials.

It is used in functional road surface maintenance, at a depth varying between 30 and 100 mm. It does not disrupt traffic flow and ensures immediate road drivability. It also ensures that maintenance lasts for a reasonable amount of time, which allows local authorities to plan road maintenance, with significant benefits in terms of road user safety.

Simex PL self-leveling road planers are designed for removing the entire layer of asphalt or cement in preparation for trenching or for milling deteriorated sections for later resurfacing. Created to  mill pre-set sections on hard and compact surfaces such as asphalt and cement, they allow the possibility to reuse milled material for backfilling trenches.
Thanks to the exclusive self-leveling system, planing depth is constant in any condition.

Simex PLC self-leveling planers clean the milled trench and deposit the extracted material to the right or left. Thanks to the self-leveling system, planing depth is constant in any condition.
Self-leveling planers are indispensable for optimizing collection of milled material for reuse on site or for transporting away.
Can be installed with spray system for dust control.

Designed for separating different-sized materials on the work site, Simex VSE screening buckets are unique for their easy loading, very simple operation and high productivity. The exclusive Simex patent allows rapid adjustment of output size of the screened material in only seconds via a control in the operator cabin.

FIT: the new screening tool configuration system.
Each element is composed of 5 independent parts, designed to easily interlock with each other with no weldings. They are easily replaceable without difficult operations and without the need of shafts unstrapping: this means 75% less maintenance costs, since it is possible to replace even just one single disc or blade. The system allows multiple configurations depending on the materials to be screened. Simex provides to the users 3 different set-ups, but many others are possible thanks to screening elements that are 100% interchangeable.

Designed to reduce the volume of aggregates directly on site, CBE crusher buckets with rotor system provide optimal performance when working with iron, rock, soil and deformable parts, and wet or humid materials. Ideal for crushing reinforced concrete and demolition waste. The exceptional cutting force allows any material to be crushed due to the rotor with teeth activated by high-displacement radial piston hydraulic motors in direct drive.  Automatic system inverts rotation of the drum in case of blocking (Simex patent).
Crushable materials: bricks, reinforced concrete, natural aggregates, concrete, tiles, glass and asphalt slabs. Unaffected by the presence of earth, wet or humid material, or iron rods.

Intended for skid steer mounting, Simex wheel saws offer different solutions for working on hard or compact surfaces, including asphalt, cement and rock: cuts and small trenches, set-section trenches, mini- and micro-trenches for fiber optic cable installation.  Full wheel protection at any working depth ensures maximum safety of persons and property.

ST asphalt floats are designed to lay asphalt or waste material to fill set-section trenches, create sidewalks or widen existing roadways. The lateral slides take the existing surface as reference, whereas the thickness of the spread asphalt can be regulated. The floating transverse tilt can be blocked in case a slide doesn’t touch the ground.

Simex TF cutter heads are ideal for trenching, profiling rock and cement walls, tunneling, quarrying, demolition, dredging, finishing operations and underwater works. They are highly effective where conventional excavation systems are too weak and percussion systems have little effect. Their quiet operation allows them to be put to work near sensitive areas (residential zones, hospitals, schools, bridges and infrastructure). Especially recommended for finishing operations, where high precision, minimum disturbance and optimum aesthetic result are required.